SKB Estuches Protectores

Professional Cases and Suitcases


iSeries 1309 Waterproof Blackmagic Design Pocket Cinema Camera 4K Case

Modelo: 3i-13096PC4K

iSeries 1309 Waterproof Blackmagic Design Pocket Cinema Camera 4K Case

Price 130 USD

This military-grade waterproof hard case was designed for photographers who just want to carry the essentials. The case interior features a custom cut, high-quality PE foam that provides space for a Blackmagic Design Pocket ...

Exterior Length: 14.75 in (37.47 cm)
Exterior Width: 12.00 in (30.48 cm)
Exterior Depth: 7.25 in (18.42 cm)

This military-grade waterproof hard case was designed for photographers who just want to carry the essentials. The case interior features a custom cut, high-quality PE foam that provides space for a Blackmagic Design Pocket Cinema Camera 4K with lens attached, lens hood section, two lens slots, and an accessory compartment. A removable section of foam will allow for a longer lens to remain attached to the camera. Each lens slot has three (3) half-inch removable rings to fit a variety of lenses. The size of each lens slot is 3" in diameter and 4.5" in depth, with all rings removed. The 3i-13096PC4K case provides the ultimate protection for essential photo gear and is backed by SKB's unsurpassed Lifetime Warranty.


iSeries Waterproof Blackmagic URSA Mini Case

Modelo: 3i-221312BKU

iSeries Waterproof Blackmagic URSA Mini Case

Price 350 USD

The iSeries 3i-221312BKU was designed to fit the Blackmagic URSA Mini camera and accessories, and features a high quality PE form-cut foam interior with removable foam blocks to accommodate any setting of the camera shoulder ...

Exterior Length: 24.18 in (61.42 cm)
Exterior Width: 15.52 in (39.42 cm)
Exterior Depth: 13.65 in (34.67 cm)

The iSeries 3i-221312BKU was designed to fit the Blackmagic URSA Mini camera and accessories, and features a high quality PE form-cut foam interior with removable foam blocks to accommodate any setting of the camera shoulder mount. Additional pockets provide room for four (4) CFast cards, a pair of 8" and 12" rods, and power supply, as well additional batteries, lenses, or other accessories. The wall joining these accessory compartments can also be removed to make one large cavity for larger equipment.

All SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, and feature a water- and dust- tight, submersible design (MIL-C-4150J) that is resistant to corrosion and impact damage (MIL-STD-810G). Other standard features include a molded-in hinge, patented “trigger release” TSA-retrofittable latches, comfortable snap-down rubber over-molded cushion grip handles, automatic ambient pressure equalization valve (MIL-STD-648C), and resistance to UV, solvents, corrosion, and fungus.


iSeries Blackmagic Design DaVinci Resolve Micro Panel Case

Modelo: 3i-18135DAV

DaVinci Resolve Micro Panel Case

Price 165 USD

The iSeries 3i-18135DAV was designed to fit the Blackmagic Design DaVinci Resolve Micro Panel and features a high quality PE foam interior that has been form cut for a custom fit.All SKB iSeries Injection Molded Mil-Standard ...

Exterior Length: 19.68 in (49.99 cm)
Exterior Width: 15.18 in (38.56 cm)
Exterior Depth: 5.46 in (13.87 cm)

 

The iSeries 3i-18135DAV was designed to fit the Blackmagic Design DaVinci Resolve Micro Panel and features a high quality PE foam interior that has been form cut for a custom fit.

All SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, and feature a water- and dust- tight, submersible design (MIL-C-4150J) that is resistant to corrosion and impact damage (MIL-STD-810G). Other standard features include a molded-in hinge, patented "trigger release" TSA-retrofittable latches, comfortable snap-down rubber over-molded cushion grip handles, automatic ambient pressure equalization valve (MIL-STD-648C), and resistance to UV, solvents, corrosion, and fungus.


iSeries Blackmagic Design ATEM CCP, ATEM 1 M/E Adv Panel or DaVinci Mini Panel Case

Modelo: 3i-221710BM1

iSeries Blackmagic Design ATEM CCP, ATEM 1 M/E Adv Panel or DaVinci Mini Panel Case

Price 385 USD

The iSeries 3i-221710BM1 was designed to fit the Blackmagic Design ATEM Camera Control Panel, ATEM 1 M/E Advanced Panel, or the DaVinci Resolve Mini Panel, and features a high quality PE foam interior that has been form cut ...

Exterior Length: 24.50 in (62.23 cm)
Exterior Width: 19.37 in (49.20 cm)
Exterior Depth: 12.22 in (31.04 cm)

The iSeries 3i-221710BM1 was designed to fit the Blackmagic Design ATEM Camera Control Panel, ATEM 1 M/E Advanced Panel, or the DaVinci Resolve Mini Panel, and features a high quality PE foam interior that has been form cut for a custom fit.

All SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, and feature a water- and dust- tight, submersible design (MIL-C-4150J) that is resistant to corrosion and impact damage (MIL-STD-810G). Other standard features include a molded-in hinge, patented "trigger release" TSA-retrofittable latches, comfortable snap-down rubber over-molded cushion grip handles, automatic ambient pressure equalization valve (MIL-STD-648C), and resistance to UV, solvents, corrosion, and fungus.


Injection Molded 2U Studio Flyer Rack Case

Modelo: 1SKB-iSF2U

Injection Molded 2U Studio Flyer Rack Case

Price 235 USD

Entrega Inmediata

Introducing the world's first injection molded waterproof carry-on studio rack case. The 1SKB-iSF2U Studio Flyer is a powerhouse of innovative features packed into a compact, convenient carry-on size. Boasting a virtually ...

Interior Width:  19.00 in  (48.26 cm)
Interior Height:  3.50 in  (8.89 cm)
Rackable Depth:  11.46 in  (29.11 cm)
Rack Units Total:  2

 

Introducing the world's first injection molded waterproof carry-on studio rack case.

The 1SKB-iSF2U Studio Flyer is a powerhouse of innovative features packed into a compact, convenient carry-on size. Boasting a virtually indestructible injection molded shell that is both lighter, stronger, and less expensive than the previous 2U Studio Flyer, the 1SKB-iSF2U also features front and rear molded-in square rack rails pre-installed with cage nuts for an extra element of security and durability for sensitive equipment on the go. Improved quiet-glide wheels, an easy-to-operate pull handle, and an unbeatable Lifetime Warranty all help to create the ultimate transport solution for studio gear today.

Laptop work surface: 19" x 11"